ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series.
- UNC – Unified National Coarse Thread - comparable with the ISO metric thread
- UNF – Unified National Fine Thread
- Female and Male UNC/UNF threads are both parallel
- The UNC/UNF flank angle is 60°
Unified threads comes in three different classes:
- for applications where a liberal tolerance is required to permit easy assembly even with slightly nicked threads
- most commonly used class for general applications
- for applications where closeness of fit and/or accuracy of thread elements are important
UNC - Unified Coarse Threads
UNC threads according ANSI B1.1:
| Major Diameter (in) | Threads per inch (tpi) | Major Diameter | Tap Drill Size (mm) | Pitch (mm) | |
|---|---|---|---|---|---|
| (in) | (mm) | ||||
| #1 - 64 | 64 | 0.073 | 1.854 | 1.50 | 0.397 |
| #2 - 56 | 56 | 0.086 | 2.184 | 1.80 | 0.453 |
| #3 - 48 | 48 | 0.099 | 2.515 | 2.10 | 0.529 |
| #4 - 40 | 40 | 0.112 | 2.845 | 2.35 | 0.635 |
| #5 - 40 | 40 | 0.125 | 3.175 | 2.65 | 0.635 |
| #6 - 32 | 32 | 0.138 | 3.505 | 2.85 | 0.794 |
| #8 - 32 | 32 | 0.164 | 4.166 | 3.50 | 0.794 |
| #10 - 24 | 24 | 0.190 | 4.826 | 4.00 | 1.058 |
| #12 - 24 | 24 | 0.216 | 5.486 | 4.65 | 1.058 |
| 1/4" - 20 | 20 | 0.250 | 6.350 | 5.35 | 1.270 |
| 5/16" - 18 | 18 | 0.313 | 7.938 | 6.80 | 1.411 |
| 3/8" - 16 | 16 | 0.375 | 9.525 | 8.25 | 1.587 |
| 7/16" - 14 | 14 | 0.438 | 11.112 | 9.65 | 1.814 |
| 1/2" - 13 | 13 | 0.500 | 12.700 | 11.15 | 1.954 |
| 9/16" - 12 | 12 | 0.563 | 14.288 | 12.60 | 2.117 |
| 5/8" - 11 | 11 | 0.625 | 15.875 | 14.05 | 2.309 |
| 3/4" - 10 | 10 | 0.750 | 19.050 | 17.00 | 2.540 |
| 7/8" - 9 | 9 | 0.875 | 22.225 | 20.00 | 2.822 |
| 1" - 8 | 8 | 1.000 | 25.400 | 22.85 | 3.175 |
| 1 1/8" - 7 | 7 | 1.125 | 28.575 | 25.65 | 3.628 |
| 1 1/4" - 7 | 7 | 1.250 | 31.750 | 28.85 | 3.628 |
| 1 3/8" - 6 | 6 | 1.375 | 34.925 | 31.55 | 4.233 |
| 1 1/2" - 6 | 6 | 1.500 | 38.100 | 34.70 | 4.233 |
| 1 3/4" - 5 | 5 | 1.750 | 44.450 | 40.40 | 5.080 |
| 2" - 4 1/2 | 4 1/2 | 2.000 | 50.800 | 46.30 | 5.644 |
| 2 1/4" - 4 1/2 | 4 1/2 | 2.250 | 57.150 | 52.65 | 5.644 |
| 2 1/2" - 4 | 4 | 2.500 | 63.500 | 58.50 | 6.350 |
| 2 3/4" - 4 | 4 | 2.750 | 69.850 | 64.75 | 6.350 |
| 3" - 4 | 4 | 3.000 | 76.200 | 71.10 | 6.350 |
| 3 1/4" - 4 | 4 | 3.250 | 82.550 | 77.45 | 6.350 |
| 3 1/2" - 4 | 4 | 3.500 | 88.900 | 83.80 | 6.350 |
| 3 3/4" - 4 | 4 | 3.750 | 95.250 | 90.15 | 6.350 |
| 4" - 4 | 4 | 4.000 | 101.600 | 96.50 | 6.350 |
Example - Typical designation of an UNC thread
See Also
UNC and UNF Thread Chart PDF (Dimensions, Diameter, Size in MM/INCH)ANSI Internal Screw Threads Size and Tolerances Table Chart1 - 8 UNC : Thread Dimensions (Machining Doctor)Unified Threads (UNC/UNF/UNEF): Dimensions & Formulas- 1/4” x 20 UNC
US Bolts - Tightening Torques
UNF - Unified National Fine Threads
UNF threads ANSI B1.1:
| Major Diameter (in) | Threads per inch (tpi) | Major Diameter | Tap Drill Size (mm) | Pitch (mm) | |
|---|---|---|---|---|---|
| (in) | (mm) | ||||
| #0 - 80 | 80 | 0.060 | 1.524 | 1.25 | 0.317 |
| #1 - 72 | 72 | 0.073 | 1.854 | 1.55 | 0.353 |
| #2 - 64 | 64 | 0.086 | 2.184 | 1.90 | 0.397 |
| #3 - 56 | 56 | 0.099 | 2.515 | 2.15 | 0.453 |
| #4 - 48 | 48 | 0.112 | 2.845 | 2.40 | 0.529 |
| #5 - 44 | 44 | 0.125 | 3.175 | 2.70 | 0.577 |
| #6 - 40 | 40 | 0.138 | 3.505 | 2.95 | 0.635 |
| #8 - 36 | 36 | 0.164 | 4.166 | 3.50 | 0.705 |
| #10 - 32 | 32 | 0.190 | 4.826 | 4.10 | 0.794 |
| #12 - 28 | 28 | 0.216 | 5.486 | 4.70 | 0.907 |
| 1/4" - 28 | 28 | 0.250 | 6.350 | 5.50 | 0.907 |
| 5/16" - 24 | 24 | 0.313 | 7.938 | 6.90 | 1.058 |
| 3/8" - 24 | 24 | 0.375 | 9.525 | 8.50 | 1.058 |
| 7/16" - 20 | 20 | 0.438 | 11.112 | 9.90 | 1.270 |
| 1/2" - 20 | 20 | 0.500 | 12.700 | 11.50 | 1.270 |
| 9/16" - 18 | 18 | 0.563 | 14.288 | 12.90 | 1.411 |
| 5/8" - 18 | 18 | 0.625 | 15.875 | 14.50 | 1.411 |
| 3/4" - 16 | 16 | 0.750 | 19.050 | 17.50 | 1.587 |
| 7/8" - 14 | 14 | 0.875 | 22.225 | 20.40 | 1.814 |
| 1" - 12 | 12 | 1.000 | 25.400 | 23.25 | 2.117 |
| 1 1/8" - 12 | 12 | 1.125 | 28.575 | 26.50 | 2.117 |
| 1 1/4" - 12 | 12 | 1.250 | 31.750 | 29.50 | 2.117 |
| 1 3/8" - 12 | 12 | 1.375 | 34.925 | 32.75 | 2.117 |
| 1 1/2" - 12 | 12 | 1.500 | 38.100 | 36.00 | 2.117 |
Example - Typical designation of an UNF thread
- 1/2” x 20 UNF
Related Topics
Fasteners
Bolts, nuts and threaded rods - torque, tension and loads.Mechanics
The relationships between forces, acceleration, displacement, vectors, motion, momentum, energy of objects and more.Threads
Thread data - metric, unified, ACME and others.
Related Documents
ANSI - American National Standards Institute
ANSI provides a forum for development of American national standards.ANSI/ASME B1.5 - ACME Screw Threads
Acme trapezoidal threads.Bolt Stretching and Tensile Stress
Tensile stress and Hooke's Law.BS 21 - Pressure Tight Pipe Thread Joints
BSPT - British Standard Pipe Taper threads & BSP or BSPF - British Standard Pipe Parallel (Straight) threads.Cast Iron Flanges - Stud Reference Chart
The number, diameter and length of studs for cast iron flanges class 125 and 250.EN 10226 - Pipe Threads where pressure tight joints are made on the threads - Dimensions
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads.Flanges - ASME/ANSI B16.5 Flanges and Bolt Dimensions - Class 150 to 2500
Diameters and bolt circles for standard ASME B16.5 flanges - 1/4 to 24 inches - Class 150 to 2500.ISO 2841 - Spark Plugs Metric Threads
Metric threads spark plugs according ISO 28741.ISO 2901 - Metric Trapezoidal Screw Threads
Dimensions of ISO metric trapezoidal screw threads.ISO 7 - Pipe Threads where Pressure-tight Joints are made on the Threads
Pressure-tight joints made on the pipe threads.ISO 724 - Metric Threads
Dimensions of metric threads according ISO 724.Lumber - Surface Finishing
Lumber and surface finishing abbreviations.Metric Bolt Heads and Wrench Sizes
ANSI/SO, DIN and JIS bolts.Metric Steel Bolts - Grades and Property Classes
Metric steel bolts, screws and studs - proof and tensile strength.Reduced Torque with Lubricated Bolts
Lubrication effect on bolt tension and torque.Screws - Metric vs. Inches
Metric versus Imperial equivalent screw dimensions.Steel Bolts - ASTM Grades
ASTM steel bolts - proof and tensile strength.Steel Bolts - SAE Grades
SAE steel bolts - grades ranging grade 1 to 8.2 - proof and tensile strength.Threaded Bolts - Stress Area
Threaded bolts tensile stress area.US Bolts - Head and Wrench Sizes
Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt.US Bolts - Tightening Torques
Recommended bolt torques.US Hex Bolts - Inches
ANSI/ASME B18.2.1 Dimensions of Hex Bolts - Imperial units.US Hex Bolts - Metric
ANSI/ASME B18.2.3M Dimensions of Hex Bolts - Metric units.US Machine Screws - Dimensions
Machine screw diameters.US Wood Screws - Nominal Sizes
Wood screws - nominal sizes vs. diameters.Whitworth Pipe Threads
BSPP (G) - British Standard Pipe Parallel and BSPT (R/Rp) – British Standard Tapered Pipe for pipes and tapered threads - G/R/Rp.Wood Screws - Withdrawal Force
Allowable withdrawal load force.Wrench Spanners - Inches vs. mm
Convert between US Inches and metric mm wrench and spanner sizes.
Search
Search is the most efficient way to navigate the Engineering ToolBox.
- Popular internal searches in the Engineering ToolBox
Engineering ToolBox - SketchUp Extension - Online 3D modeling!
Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your Sketchup model with the Engineering ToolBox - SketchUp Extension - enabled for use with older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro. Add the Engineering ToolBox extension to your SketchUp Make/Pro from the Extension Warehouse!
Translate this Page
Translate this page to Your Own Language.
About the Engineering ToolBox!
Privacy Policy
We don't collect information from our users. More about
- the Engineering ToolBox Privacy Policy
We use a third-party to provide monetization technologies for our site. You can review their privacy and cookie policy here.
You can change your privacy settings by clicking the following button: .
Advertise in the ToolBox
If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords. You can target the Engineering ToolBox by using AdWords Managed Placements.
Citation
This page can be cited as
- The Engineering ToolBox (2011). UNC and UNF - Unified Coarce and Unified Fine Inch Threads. [online] Available at: https://www.engineeringtoolbox.com/unified-screw-threads-unc-unf-d_1809.html [Accessed Day Month Year].
Modify the access date according your visit.
